best 64gb micro sd card | scandisk camera

Flash memory is a type of electronically erasable programmable read only memory (EEPROM), but may also be a standalone memory storage device such as a USB drive. EEPROM is a type of data memory device using an electronic device to erase or write digital data. Flash memory is a distinct type of EEPROM, which is programmed and erased in large blocks.
Retrospectively, Joystiq compared the GameCube’s launch window to its successor, the Wii, noting that the GameCube’s “lack of games” resulted in a subpar launch, and the console’s limited selection of online games damaged its market share in the long run.[60] Time International concluded that the system had low sales figures, because it lacked “technical innovations”.[75]
SDXC was announced at Consumer Electronics Show (CES) 2009 (January 7–10, 2009). At the same show, SanDisk and Sony also announced a comparable Memory Stick XC variant with the same 2 TB maximum as SDXC,[63] and Panasonic announced plans to produce 64 GB SDXC cards.[64]
Most flash ICs come in ball grid array (BGA) packages, and even the ones that do not are often mounted on a PCB next to other BGA packages. After PCB Assembly, boards with BGA packages are often X-rayed to see if the balls are making proper connections to the proper pad, or if the BGA needs rework. These X-rays can erase programmed bits in a flash chip (convert programmed “0” bits into erased “1” bits). Erased bits (“1” bits) are not affected by X-rays.[33][34]
Your Rescue Plan documents will be delivered to you via email only to the address associated with your account and can be found in your account message center within the Buyer/Seller Messages.
In February 2014, SanDisk announced a new microSD card, the MicroSDXC. At the time, the cards held up to 128GB. To enable this amount of storage capacity on a removable microSD card, SanDisk developed a proprietary technique that allows for 16 memory die to be vertically stacked, each shaved to be thinner than a strand of hair. At the time of their release, these cards had capacities ranging from 8GB to 128GB, with the prices ranging from $29.99 to $199.99. [6][5]
In 2005, Toshiba and SanDisk developed a NAND flash chip capable of storing 1 GB of data using multi-level cell (MLC) technology, capable of storing two bits of data per cell. In September 2005, Samsung Electronics announced that it had developed the world’s first 2 GB chip.[61]
However, when I look at “This PC” (I am on Windows 10) via File Explorer, I still cannot see anything that looks like an SD drive listed…. I’m back to square one. All I want to do is format an SD card (and a Micro SD card via an adapter) via the slot in the Notebook- but it seems not to be possible….
The NAND type operates primarily in memory cards, USB flash drives, solid-state drives (those produced in 2009 or later), and similar products, for general storage and transfer of data. NAND or NOR flash memory is also often used to store configuration data in numerous digital products, a task previously made possible by EEPROM or battery-powered static RAM. One key disadvantage of flash memory is that it can only endure a relatively small number of write cycles in a specific block.[1]
For example, if your host device requires a Speed Class 4 SD memory card, you can use Speed Class 4, 6 or 10 SD memory cards. If your host device requires a UHS Speed Class 1 SD memory card, you can use UHS Speed Class 1 or 3 SD memory cards. Video Speed Class is also the same. Note that expected write speed will not be available by a combination of different class symbols such as Class 10, U1 and V10 even those are indicated to the same 10MB/sec write speed.
CompactFlash (CF, CFast) CFexpress Express Card JEIDA MultiMediaCard (MMC) Memory Stick (MS, MS-PRO, MS-PRO HG, MS-XC) miCard Microdrive (MD) MiniCard P2 (MicroP2) PC Card (PCMCIA, CardBus, CardBay) Secure Digital (SDSC, SDHC, SDXC) SmartMedia (SM) SxS Universal Flash Storage (UFS) USB xD-Picture XQD
If our pick is out of stock or unavailable, we recommend the Iogear USB-C 3-Slot Card Reader. It was fast and reliable in all of our tests, it supports SD, microSD, and CF cards, and it’s slim and light. But it lacks an indicator light, it’s less intuitive to use, and it’s usually a little more expensive than our top pick, the Unitek. Iogear includes a three-year warranty, longer than that of any of its competitors.
When you insert a memory card, it is automatically mounted (connected to the device) and prepared for use. However, should you unmount the card without removing it from the device, you will need to mount it before it can be accessed.
The SD specification defines four-bit-wide transfers. (The MMC specification supports this and also defines an eight-bit-wide mode; MMC cards with extended bits were not accepted by the market.) Transferring several bits on each clock pulse improves the card speed. Advanced SD families have also improved speed by offering faster clock frequencies and double data rate (explained here) in a high-speed differential interface (UHS-II).[citation needed]
Consumer-grade solid-state drives (SSDs) embed silicon-based memory chips as storage media for persistent storage of data. The earliest SSDs were generally designed for consumer devices. The debut of the Apple iPod in 2005 marked the first notable flash-based device to broadly penetrate the consumer market. SanDisk has a line of portable SSDs that scale to 1.92 terabytes (TB) of flash capacity; they are marketed mainly for flash storage of digital photography.
xD cards are simply 18-pin NAND flash chips in a special package and support the standard command set for raw NAND flash access. Although the raw hardware interface to xD cards is well understood, the layout of its memory contents—necessary for interoperability with xD card readers and digital cameras—is totally undocumented. The consortium that licenses xD cards has not released any technical information to the public.
Another limitation is that flash memory has a finite number of program – erase cycles (typically written as P/E cycles). Most commercially available flash products are guaranteed to withstand around 100,000 P/E cycles before the wear begins to deteriorate the integrity of the storage.[25] Micron Technology and Sun Microsystems announced an SLC NAND flash memory chip rated for 1,000,000 P/E cycles on 17 December 2008.[26]
The speed class rating does not totally characterize card performance. Different cards of the same class may vary considerably while meeting class specifications. A card’s speed depends on many factors, including:
The Lightning to SD Card Camera Reader supports standard photo formats, including JPEG and RAW, along with SD and HD video formats, including H.264 and MPEG-4. It supports data transfer at up to USB 3 speeds on the 12.9-inch and 10.5-inch iPad Pro, and up to USB 2 speeds on the 9.7-inch iPad Pro and all other iPad and iPhone models.*
Neither the Kanex USB-C Card Reader nor the Plugable USB Type-C Flash Memory Card Reader supports CF cards. Both of them are larger and more expensive than the Cable Matters model we recommend, lack indicator lights, and have an extra Memory Stick slot that most people don’t need.
If you need a USB-A card reader, or a reader that can take both CF cards and high-speed UHS-II SD cards, the Kingston USB 3.0 High-Speed Media Reader is your best bet. The Kingston supports SD, microSD, CF, and Memory Stick cards, and it reliably transferred data at UHS-II speeds in our SD card tests. It also has a big red indicator light, and comes with a two-year warranty.
I am using this memory card for saving Gamecube games on my softmodded Wii. I am USB loading the games with Dios-Mios. That being said, I doubt that it is my application that is causing this card to fail because it has a very difficult time recognizing the card even in the Wii data options.
NAND devices also require bad block management by the device driver software, or by a separate controller chip. SD cards, for example, include controller circuitry to perform bad block management and wear leveling. When a logical block is accessed by high-level software, it is mapped to a physical block by the device driver or controller. A number of blocks on the flash chip may be set aside for storing mapping tables to deal with bad blocks, or the system may simply check each block at power-up to create a bad block map in RAM. The overall memory capacity gradually shrinks as more blocks are marked as bad.
This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (December 2011) (Learn how and when to remove this template message)
The SD/MicroSD/MMC Card Reader/Writer is a solution for hi-speed, bi-directional image and data transfer. Images and data can be transferred quickly from Secure Digital Card (SD), MultiMedia Card (MMC), or MicroSD memory cards to PCs or Macs. This is particularly useful in many applications, including digital cameras, video cameras, mobile phones, MP3, and other mobile devices. This item is an ideal way to bridge the gap between your desktop computer and other CE products.
On ASUS systems there are USB port issues going on since Windows 8.1. Since SD card reader on these ASUS models is off USB, can you please try the following which is uninstall AI Suite software as suggested in the following blog:
I looked on Estarland, Lukiegames, Disc Replay and various other stores and this one was honestly the best deal around. I got two of them because I just revamped my game cube games and this was a great buy, it gives you the max amount of memory for half the price. The ones I got were black and also the first time I plugged it in it didn’t read but then I took it out and blew on it and then giggled it and it has been perfect ever since. I use it in my wii and I couldn’t be happier.

The Video Speed Classes defined by the SD Association are V6, 10,30,60 and 90. V6 and V10 can be applied to High Speed and UHS Bus IF product family. V30 can be applied to UHS Bus IF product family. V60 and V90 can be applied to UHS-II / UHS-III product family.
If you purchase this service plan and eligible product for this service plan, you acknowledge that Amazon may send the service plan seller relevant product and price information for the purpose of administering the plan
With bargains starting from under $1, shop GearBest’s comprehensive selection of top memory cards and accessories. Get the mobile experience you deserve and browse premium quality memory cards by brand, memory capacity, memory card type, memory card class type, and Canon EOS. Filter by popularity and price and find the memory card that’s right for you. Capture your world anytime, anywhere with our bargains for every budget and shop the best deals at GearBest today.
Based on the above and other problem reports, it appears that Dell, Asus, and Lenovo are not updating their SD drivers. I could not find a new driver on the Dell site and found a note indicating that there was no intention to update the driver for my XPS. What did Microsoft do in Windows 10 to discourage these manufacturers from updating their SD reader drivers?
Nintendo learned from its experiences – both positive and negative – with the Nintendo 64’s three-handled controller design and went with a two-handled, “handlebar” design for the GameCube. The shape was made popular by Sony’s PlayStation controller released in 1994 and its follow-up DualShock series of gamepads introduced in 1997. In addition to vibration feedback, the DualShock series was well known for having two analog sticks to improve the 3D experience in games. Nintendo and Microsoft designed similar features in the controllers for their sixth-generation consoles, but instead of having the analog sticks parallel to each other, they chose to stagger them by swapping the positions of the directional pad (d-pad) and left analog stick. The GameCube controller features a total of eight buttons, two analog sticks, a d-pad, and an internal rumble motor. The primary analog stick is on the left with the d-pad located below and closer to the center. On the right are four buttons: a large, green “A” button in the center, a smaller red “B” button to the left, an “X” button to the right, and a “Y” button at the top. Below and to the inside is a yellow “C” analog stick, which often serves a variety of in-game functions, such as controlling the camera angle. The Start/Pause button is located in the middle, and the rumble motor is encased within the center of the controller.[49][50][51]
NOR memory has an external address bus for reading and programming. For NOR memory, reading and programming are random-access, and unlocking and erasing are block-wise. For NAND memory, reading and programming are page-wise, and unlocking and erasing are block-wise.
Consumer flash storage devices typically are advertised with usable sizes expressed as a small integer power of two (2, 4, 8, etc.) and a designation of megabytes (MB) or gigabytes (GB); e.g., 512 MB, 8 GB. This includes SSDs marketed as hard drive replacements, in accordance with traditional hard drives, which use decimal prefixes.[60] Thus, an SSD marked as “64 GB” is at least 64 × 10003 bytes (64 GB). Most users will have slightly less capacity than this available for their files, due to the space taken by file system metadata.
The second-generation Secure Digital (SDSC or Secure Digital Standard Capacity) card was developed to improve on the MultiMediaCard (MMC) standard, which continued to evolve, but in a different direction. Secure Digital changed the MMC design in several ways:
Doubling the storage space of the 16GB variety, the Sandisk Extreme Pro 32GB features the same high-speed spec, but with even more space. Perfect for the avid videographer shooting lots of high quality videos, at a great price.
Prior to the Nintendo GameCube’s release, Nintendo focused resources on the launch of the Game Boy Advance, a handheld game console and successor to the original Game Boy and Game Boy Color. As a result, several games originally destined for the Nintendo 64 console were postponed in favor of becoming early releases on the GameCube. The last first-party game in 2001 for the Nintendo 64 was released in May, a month before the Game Boy Advance’s launch and six months before the GameCube’s, emphasizing the company’s shift in resources. Concurrently, Nintendo was developing software for the GameCube which would provision future connectivity between it and the Game Boy Advance. Certain games, such as The Legend of Zelda: Four Swords Adventures and Final Fantasy Crystal Chronicles, can use the handheld as a secondary screen and controller when connected to the console via a link cable.[21][22]
It gets two stars because it can save/load so it does work…but my Wii has a very difficult time recognizing the card and I have to pull it out of the slot and insert it back several times for it to read. For how often I am going to use it this is okay. It is frustrating and not what I want to do but it will work.
There remain some aspects of flash-based SSDs that make them unattractive. The cost per gigabyte of flash memory remains significantly higher than that of hard disks.[72] Also flash memory has a finite number of P/E cycles, but this seems to be currently under control since warranties on flash-based SSDs are approaching those of current hard drives.[73] In addition, deleted files on SSDs can remain for an indefinite period of time before being overwritten by fresh data; erasure or shred techniques or software that work well on magnetic hard disk drives have no effect on SSDs, compromising security and forensic examination.
Will Greenwald has been covering consumer technology for a decade, and has served on the editorial staffs of, Sound & Vision, and Maximum PC. His work and analysis has been seen in GamePro,,, and several other publications. He currently covers consumer electronics in the PC Labs as the in-house home entertainment expert… See Full Bio
At 2.2 inches wide, the Unitek is a little broader than all of our other picks (even the bulky Kingston USB 3.0 High-Speed Media Reader), but it’s only 2.4 inches long, around a half inch shorter than most of the competition. It also comes with a white, 12-inch connecting cable attached to its back. It’s easily pocketable and very light at 2.2 ounces, and its glossy silver finish makes it better-looking than some of the other card readers we’ve tested.
If your camera uses SD cards but your laptop lacks a card reader (or it has one, and you’re unimpressed by its speed), you’ll need a separate card reader that hooks up to your laptop via USB-C or USB-A to transfer your photos and videos.
In addition to flash memory arrays, the ability to insert SSDs in x86-based servers has increased the technology’s popularity. This arrangement is known as server-side flash memory and it enables companies to sidestep the vendor lock-in associated with purchasing expensive and integrated flash storage arrays.
The Lexar Professional USB 3.0 Dual-Slot Reader was our former pick for USB-A ports, but Micron has since shuttered the Lexar brand. It was a little speedier than the Kingston when it worked—its read and write speeds were 27 MB/s and 12 MB/s faster than the Kingston, respectively—but the first two Lexar units we tested gave us only UHS-I speeds instead of faster UHS-II speeds on both Mac and Windows.
NAND flash architecture was introduced by Toshiba in 1989.[38] These memories are accessed much like block devices, such as hard disks. Each block consists of a number of pages. The pages are typically 512[39] or 2,048 or 4,096 bytes in size. Associated with each page are a few bytes (typically 1/32 of the data size) that can be used for storage of an error correcting code (ECC) checksum.
I have had the same problem with my Dell XPS L502x but the SD card reader will read the slow cards 4gb but when I put a 32 GB xtream it will not read so I have to use a USB card reader , I also have trouble now with the integrated web-cam this will not work through the Windows applications but have done a test online and it works, I have tried bios upgrades and there are no updates on the drives so like we all have been left high and dry !! 
About The Author: Jay Geater is the President and CEO of Solvusoft Corporation, a global software company focused on providing innovative utility software. He is a lifelong computer geek and loves everything related to computers, software, and new technology.
Whatever, you need to be careful when deleting your memory card. Ideally, you only need to delete the card when you change your phone. When your phone is actively accessing the memory card, but  the connection is disconnected, normally, the card does not know how to handle it. So this may cause your picture can not open correctly, your app crashes. or even for a very sluggish phone,  when the phone is completely turned off the SD card can  be removed. But many phones have an “Uninstall SD Card” option in their settings, so you can switch them when you need .
UHS-II standard SDHC/SDXC cards were recently released by Sandisk and aim to offer quicker transfer rates, increasing write speeds up to 250MB/s or faster. The Sandisk Extreme Pro cards match up with the sheer amount of data streaming through the camera’s buffer when shooting lots of Raw files or high quality HD movies. Prices can range between around £50-£150 depending on the capacity (currently 16-64GB).
Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of FAT12, FAT16 or FAT32.[107] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.
Although flash memory is technically a type of EEPROM, the term “EEPROM” is generally used to refer specifically to non-flash EEPROM which is erasable in small blocks, typically bytes.[citation needed] Because erase cycles are slow, the large block sizes used in flash memory erasing give it a significant speed advantage over non-flash EEPROM when writing large amounts of data. As of 2013, flash memory costs much less than byte-programmable EEPROM and had become the dominant memory type wherever a system required a significant amount of non-volatile solid-state storage.
{{::productDet.productInfo.productDisplayName}}{{::productDet.productInfo.productDisplayName}} for UPC {{::productDet.productInfo.upc}} {{::productDet.productInfo.productSize}} x {{::productDet.productInfo.retailUnitQty}}
Write speed is how fast images can be saved onto a memory card. This is a critical need, especially if your camera takes high-resolution images, burst pictures or HD video. If you have a slower memory card, you may have to wait for the memory card to finish writing before you can take additional shots, which could cause you to miss the perfect photo. If your card is too slow to properly handle video, it may cause dropped frames, inferior quality, or stop recording altogether. So if you’re doing sports photography, or taking video, make sure to look for a higher write speed.

4 Replies to “best 64gb micro sd card | scandisk camera”

  1. Find a broad range of memory cards and accessories at Your local Best Buy store also has a selection of memory cards. Plus, our friendly Blue Shirts are there to answer questions and help with choosing the best memory card for your needs.
    I’m not a tech wiz but I’m by no means a complete moron when it comes to technology but I was somewhat distressed to find how little I knew about memory cards. I had received one with a little no frills digital camera a few years ago & had used them already but a recent faux pas brought my ignorance to light. I was at one of my daughter’s competitions with my little Panasonic video camera intending to record her show (she does color guard). We had bought the video camera a couple of years ago. It needed a memory card so I just took the one out of my other camera thinking that’s what I needed. Here’s where not realizing the difference between MB and GB ruined my plans.Trying to record the show, I kept getting the message that the memory was full. Turns out… The card was just 512MB! Those of you in the know are laughing I’m sure…yep, that may be fine for photos but NOT video..So after finding out 1 GB is roughly the same as 1000 MB, I knew what to look for. This card has a good amount of memory. I’ve recorded several of my daughter’s routines and still show as having just under half the memory available. I also have found that you get what you pay for. I bought a generic card that didn’t work and another that got corrupted quickly so I only trust SanDisk now! My next step is getting a 32GB and having a backup card at all times!
    Samsung Galaxy Note II owner – card worked great out of the package without any need for formatting in my phone. Just after the 30-day return period had expired, I’ve started noticing the Reading SD Card icon briefly appearing when I wake my phone from sleep. Now, I’m constantly getting read errors on my phone asking me to format my card. After formatting on my computer (tried FAT32 and FAT – on my computer because it does not format on my phone with this error) and then again on my phone (to ensure a correct format), it would briefly work for about an hour and then the reading errors would recur. It’s just a matter of time before complete and utter card failure. The card is a complete failure now with the constant read errors. It simply is not usable. Bought this card on sale (not much of a savings now that I have a useless chunk of plastic). Thought I’d risk it even though SanDisk’s quality has been on the decline, but never again. Who would have thought that SanDisk, once a leader in flash memory, would have fallen so low. I’ve never had any of my Patriot cards fail as miserably as this SanDisk card. I should have suspected the poor quality control by just looking at the cheap grey and red paint job on the card. I highly recommend anyone thinking about buying this card to learn from my mistake and reconsider spending a little more to buy from a quality company.
    The advent of flash memory fueled the rise of all-flash arrays. These systems contain only SSDs. They offer advantages in performance, and sometimes reduced operational costs, compared to all disk-based storage arrays. The chief difference, aside from the media, is in the underlying physical architecture used to write data to a storage device.
    If your device is able to use a Secure Digital High Capacity (SDHC) and Secure Digital eXtended Capacity (SDXC) card, you’ll be able to store substantially more photos and videos than traditional SD cards. However, these formats are not backward compatible.
    The one-bit SD protocol was derived from the MMC protocol, which envisioned the ability to put up to three cards on a bus of common signal lines. The cards use open collector interfaces, where a card may pull a line to the low voltage level; the line is at the high voltage level (because of a pull-up resistor) if no card pulls it low. Though the cards shared clock and signal lines, each card had its own chip select line to sense that the host device had selected it.[citation needed]
    SPI bus mode: Serial Peripheral Interface Bus is primarily used by embedded microcontrollers. This bus type supports only a 3.3-volt interface. This is the only bus type that does not require a host license.

  2. NOR and NAND flash memory differ in architecture and design characteristics. NOR flash uses no shared components and can connect individual memory cells in parallel, enabling random access to data. A NAND flash cell is more compact and has fewer bit lines, stringing together floating gate transistors to increase storage density.
    Anecdotal evidence suggests NAND flash drives are not wearing out to the degree once feared. Flash drive manufacturers have improved endurance and reliability through error correction code algorithms, wear leveling and other technologies.

  3. While the SD Association (the group that defines SD card technology) doesn’t release exact speed standards for card classes to non-members, it does offer loose guidelines for which classes are acceptable various uses. Class 2 is suitable for standard-definition video recording, while Class 4 and Class 6 can record high-definition video. Class 10 is the card for HD video and “HD still consecutive recording,” which, like the classes’ speeds, is ill-defined. The various card classes seem to have different speed ranges according to different memory manufacturers. According to Sandisk, for example, Class 4 cards offer read and write speeds of 15 megabytes per second (MBps), Class 6 cards can handle 20MBps, and Class 10 cards reach 30MBps. Kingston, on the other hand, describes its Class 4 cards as delivering a 4MBps data transfer rate, Class 6 as having 15MBps write speed, and Class 10 offering a 40MBps data transfer rate. According to Sandisk, UHS-1 SD cards can transfer up to 45MBps, and according to the SD Association, the maximum transfer speed based on the interface bus used is 310MBps (though this limit won’t be reached by cards for a long time, likely after several faster UHS speed classes are defined).
    Store up to 32GB of your favorite photos, videos and music on this SanDisk Ultra microSDHC memory card that offers Class 10 video recording capability and up to 30MB/sec. read speed for fast data transfer.
    The presence of a notch, and the presence and position of a tab, have no effect on the SD card’s operation. A host device that supports write protection should refuse to write to an SD card that is designated read-only in this way. Some host devices do not support write protection, which is an optional feature of the SD specification. Drivers and devices that do obey a read-only indication may give the user a way to override it.
    Prior to the Nintendo GameCube’s release, Nintendo focused resources on the launch of the Game Boy Advance, a handheld game console and successor to the original Game Boy and Game Boy Color. As a result, several games originally destined for the Nintendo 64 console were postponed in favor of becoming early releases on the GameCube. The last first-party game in 2001 for the Nintendo 64 was released in May, a month before the Game Boy Advance’s launch and six months before the GameCube’s, emphasizing the company’s shift in resources. Concurrently, Nintendo was developing software for the GameCube which would provision future connectivity between it and the Game Boy Advance. Certain games, such as The Legend of Zelda: Four Swords Adventures and Final Fantasy Crystal Chronicles, can use the handheld as a secondary screen and controller when connected to the console via a link cable.[21][22]
    Jump up ^ Ishida, K. et al., “1.8 V Low-Transient-Energy Adaptive Program-Voltage Generator Based on Boost Converter for 3D-Integrated NAND Flash SSD” Archived 13 April 2016 at the Wayback Machine.. 2011.
    They still have gamecubes here in my small city, I’d love to hear that they get more wii’s (I have one). My friend that works there says employees are allowed to reserve them, I only got mine cause they forgot to hold the consoles this shipment. 
    MultiMediaCard: Developed in 1997 by SanDisk and Siemens, MMCs were originally designed to use NAND flash memory technology from Toshiba. However, MMCs are less common with the arrival of SD card technology. Most computer hardware vendors no longer provide ports for inserting an MMC device. A new development is embedded MMC, or eMMC, in which the flash card is integrated on the computer motherboard along with controller software to use the eMMC as a bootable system drive. MMCs weigh approximately two grams.
    Integrated USB connector – The SanDisk SD Plus product can be plugged directly into a USB port without needing a USB card reader.[55] Other companies introduced comparable products, such as the Duo SD product of OCZ Technology and the 3 Way (microSDHC, SDHC, and USB) product of A-DATA, which was available in 2008 only.

  4. Example applications of both types of flash memory include personal computers, PDAs, digital audio players, digital cameras, mobile phones, synthesizers, video games, scientific instrumentation, industrial robotics, and medical electronics. In addition to being non-volatile, flash memory offers fast read access times, although not as fast as static RAM or ROM.[2] Its mechanical shock resistance helps explain its popularity over hard disks in portable devices, as does its high durability, ability to withstand high pressure, temperature and immersion in water, etc.[3]
    The first thing to consider when getting a memory card is where you’re going to use it. Different cameras, camcorders, and smartphones use different sizes of card, and while you can start with the smallest and use adapters to work your way up, it’s generally best to use the card size intended for the device.

Leave a Reply

Your email address will not be published. Required fields are marked *